G4/G4 filter set for Ubbink Ubiflux Medium
2 filters · 237 × 495 × 5 mm · 2 × ISO Coarse 75% (G4)
€9.00incl. 21% VAT
Back in stock soon
Tell me when it is back
- Free delivery from €50 (€80 in France)
- 14 days to change your mind
- Secure payment: Bancontact, Visa, Mastercard
- Advice from ventilation technicians
You receive
- 2 × G4 · ISO Coarse 75 % · 237 × 495 × 5 mm
Fits
Specifications
- Filter brand
- VMCDirect
- Set
- G4/G4
- Number of filters
- 2
- Filter dimensions
- 237 × 495 × 5 mm
- Available classes
- 2 × ISO Coarse 75% (G4)
- Recommended replacement
- Every 6 months, check every 3 months
About this set
This set replaces the 2 filters of your Ubbink Ubiflux Medium, sized 237 × 495 × 5 mm, with G4 (ISO Coarse) on both sides. It is the standard configuration: it protects the unit and its heat exchanger from dust and keeps the airflow up.
Swapping takes a few minutes, usually without tools: switch the unit off, open the filter doors, take the old filters out noting the airflow direction, slide the new ones in the same way, then reset the filter counter if your unit has one.
Frequently asked questions
G4/G4 or G4/F7: which set for the Ubiflux Medium?
G4/G4 is the standard configuration, a coarse filter on each side. G4/F7 puts a fine filter (ISO ePM1 65%) on the fresh air, against pollen and fine particles, and keeps the G4 on the extract. In a city or near a busy road, pick G4/F7.
How can I be sure the filter fits my Ubiflux Medium?
Compare the dimensions on this page, 237 × 495 × 5 mm, with the label of your current filter. If in doubt, send us a photo: we check before shipping.
How often should the Ubiflux Medium filters be replaced?
Every six months in normal use, every three to four months in a city, near a busy road or during building work. A dark grey or bent filter should be changed right away.
When are the filters shipped?
Sets in stock ship by parcel, with a tracking e-mail. A set marked “back in stock soon” does not ship: leave your e-mail and we will tell you.